Microscope Lamps and Accessories
Electron Microscopy Sciences AMP Passive Air Isolation Platform with Stainless Steel Surface 75 x 75 cm
These High Performance anti-vibration platforms for microscopes are designed to be pumped-up and left alone. Simple to use, they are ideal for use with fixed loads or in applications where pressurised air or gas cannot be used. The unique air damped rolling diaphragm sub 2Hz frequency isolator removes up to 99 percent of vibrations. And sound deadening construction eliminates unwanted surface vibrations. They support loads up to 100kg .
Size: 75 x 75 cm
Surface: Stainless Steel
Electron Microscopy Sciences NIGHTSEA™ Stereo Fluorescence Add-On Light and Filter Set, Green-Only
Additional combinations excitation/ emission wavelength combination can be added NIGHTSEA™ Stereo Microscope Fluorescence Viewing system by purchasing a kit that consists of a light head, barrier filter, and viewing shield. These three elements can be removed and replaced in seconds, and color coding ensures that you are using the right combination. Sets are named and color coded for the color of the excitation light, not the color of the emitted fluorescence.
Color: Green-Only
Excitation: 440-460nm
Emission filter: 500-560 nm bandpass
Fluorophores: GFP, eGFP, fluorescein
Electron Microscopy Sciences Microscope Graticule NE1 Horizontal, 25 mm, 10 mm with 0.1 mm subdivisions
These scales are used for the measuring of lengths of specimen or distances between points on a variety of different shaped objects. By dividing the division of the chosen graticule by the magnification of the objective one obtains an approximate value that each division will represent on the stage. Horizontal micrometer scale.
Size: 25 mm
Electron Microscopy Sciences Microscope Graticule NE1 Horizontal, 23 mm, 10 mm with 0.1 mm subdivisions
These scales are used for the measuring of lengths of specimen or distances between points on a variety of different shaped objects. By dividing the division of the chosen graticule by the magnification of the objective one obtains an approximate value that each division will represent on the stage. Horizontal micrometer scale.
Size: 23 mm
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 26 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 26 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image
Electron Microscopy Sciences Pharmaceutical PSA Pattern Graticle G-57, 27 mm, Glass sandwich
This graticule was designed for the pharmaceutical industry. However, it is also useful where particle size considerations are restricted to 10 mm and 25 mm. Dots and circles give quick references for these two sizes. In addition a scale is incorporated. The microscope must be calibrated when ordering this graticule, such that the circle must equate to 1 mm on the microscope stage.
Size: 27 mm
Surface: Glass sandwich
Electron Microscopy Sciences INFINITY 3S-1UR Color Camera CCD
The INFINITY3S-1UR is a high-speed, ultra-sensitive research grade microscopy camera with 1.4 megapixel resolution. The camera incorporates Sony's new ICX825 CCD sensor, producing much higher dynamic range and sensitivity over the popular ICX285 sensor. The INFINITY3S-1UR has the unmatched light sensitivity needed for challenging low light applications, such as fluorescence and NIR imaging. Lumenera's high-speed USB 3.0 data interface provides maximum allowable throughput where full resolution images can be sent to a host computer at an industry leading 60 fps.
Electron Microscopy Sciences Standard Pin SEM Stub 12 Division 32 mm head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
Pin stub mount with 12 divisions for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan SEMs. Made from ultra-pure aluminum with a standard lathe finish.
Head: 32 mm
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 38 mm head with 8 mm Pin, Aluminum, 3.2 mm Pin diameter
Pin stub mount with slotted head for use with Leica, Cambridge, LEO, FEI, Phillips, PHENOM, Zeiss, Camscan. Made from ultra-pure aluminum with a standard lathe finish.
Head: 38 mm
Pin height: 8 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences SEM TM-3000 Angle Mount 25° Angle 25 mm Head, Aluminum
SEM specimen mount for TM1000/TM3000 with EDS Analysis Systems. These angled mounts feature an orientation cross for precise positioning towards the EDS detector. A tilt provides better detection and higher signal-to-noise ratio for x-ray analysis. Made from Aluminum.
Head: 25 mm
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1-1/4" head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM specimen mount with shorter pin and slotted head for use with Zeiss/LEO 1500 SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1" surface, 8 mm height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 8 mm
Electron Microscopy Sciences SEM Hitachi Mounts Rectangular 11 mm x 5.5 mm, 3.5 mm height
Rectangular SEM specimen mounts for use with Hitachi S-5200/S-5500/SU-9000. Made from ultra-pure aluminum. Available in 11 mm x 5.5 mm with 2, 3.5, 5 or 5..5 mm height.
Size: 3.5 mm
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 13/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 13/16"
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1" head with 6 mm Pin, Aluminum, 3.2 mm Pin diameter
SEM specimen mount with shorter pin and slotted head for use with Zeiss/LEO 1500 SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Pin height: 6 mm
Pin diameter: 3.2 mm